Melange history: Difference between revisions

Revision as of 22:25, 24 July 2023

6.3 > 7.0

Proxmox uses apt for upgrades. I followed this, for the most part.

Update all VMS
Shut down all VMS
Fully update current version's apt packages - this took me from 6.3 to 6.4, a necessary first step.

sudo apt update
sudo apt dist-upgrade

Upgrade basic apt sources list from buster to bullseye

sudo sed -i 's/buster\/updates/bullseye-security/g;s/buster/bullseye/g' /etc/apt/sources.list
# instructions discuss pve-enterprise but i needed to change pve-no-subscription instead - but same exact steps, otherwise
# ie, leave this commented out, but might as well set to bullseye
# /etc/apt/sources.list.d/pve-enterprise.list
# and update this to bullseye
# /etc/apt/sources.list.d/pve-no-subscription.list

Perform the full upgrade to bullseye / pm 7

sudo apt update
sudo apt dist-upgrade

Reboot

Manual restart notes

NOTE: This shouldn't be a problem any more with newer staged order restart.

One time bandit samba shares don't mount (it comes up too fast perhaps?). So restart them then restart qbt nox:

mh-setup-samba-shares
sudo service qbittorrent-nox restart

I did another round of `apt update && apt dist-upgrade` without stopping containers and it went fine (with bandit fixup still needed after reboot, tho).

sudo apt update
sudo apt dist-upgrade
ssh bandit
mh-setup-samba-shares
sudo service qbittorrent-nox restart

Add 7 1TB zraid

After adding 7 new 1 TB ssds:

 🌐 m@melange  [~] sudo lsblk |awk 'NR==1{print $0" DEVICE-ID(S)"}NR>1{dev=$1;printf $0" ";system("find /dev/disk/by-id -lname \"*"dev"\" -printf \" %p\"");print "";}'|grep -v -E 'part|lvm'
NAME                         MAJ:MIN RM   SIZE RO TYPE MOUNTPOINT DEVICE-ID(S)
sdh                            8:112  0 931.5G  0 disk   /dev/disk/by-id/wwn-0x500a0751e5a2fb01 /dev/disk/by-id/ata-CT1000MX500SSD1_2122E5A2FB01
sdi                            8:128  0 931.5G  0 disk   /dev/disk/by-id/ata-CT1000MX500SSD1_2122E5A2FD56 /dev/disk/by-id/wwn-0x500a0751e5a2fd56
sdj                            8:144  1 931.5G  0 disk   /dev/disk/by-id/ata-CT1000MX500SSD1_2122E5A313D2 /dev/disk/by-id/wwn-0x500a0751e5a313d2
sdk                            8:160  1 931.5G  0 disk   /dev/disk/by-id/ata-CT1000MX500SSD1_2122E5A313D6 /dev/disk/by-id/wwn-0x500a0751e5a313d6
sdl                            8:176  1 931.5G  0 disk   /dev/disk/by-id/ata-CT1000MX500SSD1_2117E59AAE1B /dev/disk/by-id/wwn-0x500a0751e59aae1b
sdm                            8:192  1 931.5G  0 disk   /dev/disk/by-id/wwn-0x500a0751e5a2e131 /dev/disk/by-id/ata-CT1000MX500SSD1_2121E5A2E131
sdn                            8:208  1 931.5G  0 disk   /dev/disk/by-id/wwn-0x500a0751e5a3009a /dev/disk/by-id/ata-CT1000MX500SSD1_2122E5A3009A
nvme0n1                      259:0    0 931.5G  0 disk   /dev/disk/by-id/nvme-eui.002538510141169d /dev/disk/by-id/nvme-Samsung_SSD_970_EVO_Plus_1TB_S4EWNJ0N107994E

Before adding 7 new 1 TB ssds:

 🌐 m@melange  [~] ls /dev/
autofs           dm-8       i2c-7         net        stdin   tty28  tty5       ttyS12  ttyS6    vcsu1
block            dm-9       i2c-8         null       stdout  tty29  tty50      ttyS13  ttyS7    vcsu2
btrfs-control    dri        i2c-9         nvme0      tty     tty3   tty51      ttyS14  ttyS8    vcsu3
bus              ecryptfs   initctl       nvme0n1    tty0    tty30  tty52      ttyS15  ttyS9    vcsu4
char             fb0        input         nvme0n1p1  tty1    tty31  tty53      ttyS16  udmabuf  vcsu5
console          fd         kmsg          nvme0n1p2  tty10   tty32  tty54      ttyS17  uhid     vcsu6
core             full       kvm           nvme0n1p3  tty11   tty33  tty55      ttyS18  uinput   vfio
cpu              fuse       lightnvm      nvram      tty12   tty34  tty56      ttyS19  urandom  vga_arbiter
cpu_dma_latency  gpiochip0  log           port       tty13   tty35  tty57      ttyS2   userio   vhci
cuse             hpet       loop0         ppp        tty14   tty36  tty58      ttyS20  vcs      vhost-net
disk             hugepages  loop1         pps0       tty15   tty37  tty59      ttyS21  vcs1     vhost-vsock
dm-0             hwrng      loop2         psaux      tty16   tty38  tty6       ttyS22  vcs2     watchdog
dm-1             i2c-0      loop3         ptmx       tty17   tty39  tty60      ttyS23  vcs3     watchdog0
dm-10            i2c-1      loop4         ptp0       tty18   tty4   tty61      ttyS24  vcs4     zero
dm-11            i2c-10     loop5         pts        tty19   tty40  tty62      ttyS25  vcs5     zfs
dm-12            i2c-11     loop6         pve        tty2    tty41  tty63      ttyS26  vcs6
dm-13            i2c-12     loop7         random     tty20   tty42  tty7       ttyS27  vcsa
dm-14            i2c-13     loop-control  rfkill     tty21   tty43  tty8       ttyS28  vcsa1
dm-2             i2c-14     mapper        rtc        tty22   tty44  tty9       ttyS29  vcsa2
dm-3             i2c-2      mcelog        rtc0       tty23   tty45  ttyprintk  ttyS3   vcsa3
dm-4             i2c-3      mem           shm        tty24   tty46  ttyS0      ttyS30  vcsa4
dm-5             i2c-4      mpt2ctl       snapshot   tty25   tty47  ttyS1      ttyS31  vcsa5
dm-6             i2c-5      mpt3ctl       snd        tty26   tty48  ttyS10     ttyS4   vcsa6
dm-7             i2c-6      mqueue        stderr     tty27   tty49  ttyS11     ttyS5   vcsu

Add samba shares manually

During original configuration, I added samba shares manually.

sudo emacs /etc/fstab # and paste samba stanza from another machine
sudo emacs /root/samba_credentials
sudo mkdir /spiceflow && sudo chmod 777 /spiceflow
🌐 m@melange  [~] mkdir /spiceflow/bitpost
🌐 m@melange  [~] mkdir /spiceflow/grim
🌐 m@melange  [~] mkdir /spiceflow/mack
🌐 m@melange  [~] mkdir /spiceflow/reservoir
🌐 m@melange  [~] mkdir /spiceflow/sassy
🌐 m@melange  [~] mkdir /spiceflow/safe

Now you can mount em up and hang em high!