My server rack: Difference between revisions

From Bitpost wiki
 
(24 intermediate revisions by the same user not shown)
Line 2: Line 2:


== Power ==
== Power ==
* [[CyberPower OR700LCDRM1U UPS]]
* [[CyberPower OR700LCDRM1U UPS]] 700VA/400W
This has automatic voltage regulation, using transformer bypass during normal voltage delivery, for a potential 75% energy savings.
The CyberPower has a very useful "Load Percentage" display.  It is under ~65% load with bitpost and melange plugged in.  I decided I did not want to keep it perpetually on the edge of overload by adding cast to it.
* [[APC Back-UPS E S 550]]
 
This has many spare batteries and should be around for a long time.
* [[APC Back-UPS E S 550]] 550VA/330W
This dirty power does the dirty work, providing UPS for cast and all additional electronics.
 
All electronics that are not UPS protected are behind the surge protection of both the CyberPower and APS550.


=== Power consumption ===
=== Power consumption ===


Sony 65" TV consumes 37% of the UPS capacity.
{| class="wikitable" style="margin:auto"
Bluto consumes 45% during normal usage, and 135% during GPU gameplay (and UPS continuously beeps until GPU usage stops).
! Component !! PSU !! CyberPower isolated capacity
|-
| Bitpost || [https://www.newegg.com/evga-750-gq-210-gq-0750-v1-750-w-80-plus-gold-certified/p/N82E16817438060?Item=N82E16817438060 750W] || 30-35%
|-
| Melange || [https://www.newegg.com/evga-750-gq-210-gq-0750-v1-750-w-80-plus-gold-certified/p/N82E16817438060?Item=N82E16817438060 750W] || 30-35%
|-
| Cast || [https://www.newegg.com/evga-750-gq-210-gq-0750-v1-750-w-80-plus-gold-certified/p/N82E16817438060?Item=N82E16817438060 750W] || 30-35%
|-
| Bluto || [https://www.neweggbusiness.com/product/product.aspx?item=9b-17-153-448 1050W] || 45%, 135% when gaming (overloaded, constant beeping)
|-
| Toggle-off power strip || - || 40% fully loaded with Sony Logitech etc.
|-
| Sony 65" TV || - || 37%
|-
| Logitech 7.1 amped speakers || - || 3%
|}


Bluto uses [https://www.neweggbusiness.com/product/product.aspx?item=9b-17-153-448 Thermaltake Toughpower GF A3 ATX 3.0 1050W] PSU
=== Layout ===


=== Layout ===
* CyberPower
** UPS
*** Bitpost
*** Melange
** Surge
*** APS Back-UPS ES 550W
**** UPS
***** Cast
***** Google 2Gb floor cable modem
***** Google 2Gb wall cable modem
***** Always-on UPS power strip
****** Server rack fans
****** TP-Link TL-SG1024 24-port gigabit switch
****** Asus AC1300 wireless router
****** Ageen standup desk USB hub
**** Surge
***** Bluto
***** Always-on Surge power strip
****** Phone chargers
****** Server rack USB hub
***** Toggle-off power strip
****** Sony 65" TV
****** Logitech 7.1 amplified speakers
****** KVM hub


* CyberPower
== HISTORY ==
* APS Back-UPS ES 550W


=== Layout ===
* Prev APS Back-UPS 750 ES UPS: melange, cast, Always-On-Ups strip (usb hub, server case fan, asus router, tplink switch)
* Prev APS Back-UPS 750 ES Surge: Always-On-Surge strip
* Prev APS 750 was plugged into APS 550 surge


*  
Update:
* APS Back-UPS ES 550W
* x pull toggle-off power strip from wall, plug into APS550 Surge
* x mount CyberPower and plug into wall
* x update and shut down Bitpost, unplug, plug into CP-UPS, turn on, fix IP as needed, etc.
* x check power consumption and adjust plan
* x update and shut down melange, unplug, plug into CP-UPS, turn on
* x check power consumption and adjust plan - seems to me putting cast on CP-UPS would push us over the limit far too often
* x update and shut down cast, unplug
* x pull APS550 from wall, plug into CP Surge
* plug cast into APS550, turn on
* fix IP as needed etc
* pull always-on-ups strip from APS 750W, plug into APS550 UPS
* pull APS750 from APS550, harvest battery, mark battery, SMASH APS750

Latest revision as of 03:41, 1 September 2024

I picked up my server rack from some local guy that seemed to be selling off an abandoned server farm, I think in Morrisville.

Power

The CyberPower has a very useful "Load Percentage" display. It is under ~65% load with bitpost and melange plugged in. I decided I did not want to keep it perpetually on the edge of overload by adding cast to it.

This dirty power does the dirty work, providing UPS for cast and all additional electronics.

All electronics that are not UPS protected are behind the surge protection of both the CyberPower and APS550.

Power consumption

Component PSU CyberPower isolated capacity
Bitpost 750W 30-35%
Melange 750W 30-35%
Cast 750W 30-35%
Bluto 1050W 45%, 135% when gaming (overloaded, constant beeping)
Toggle-off power strip - 40% fully loaded with Sony Logitech etc.
Sony 65" TV - 37%
Logitech 7.1 amped speakers - 3%

Layout

  • CyberPower
    • UPS
      • Bitpost
      • Melange
    • Surge
      • APS Back-UPS ES 550W
        • UPS
          • Cast
          • Google 2Gb floor cable modem
          • Google 2Gb wall cable modem
          • Always-on UPS power strip
            • Server rack fans
            • TP-Link TL-SG1024 24-port gigabit switch
            • Asus AC1300 wireless router
            • Ageen standup desk USB hub
        • Surge
          • Bluto
          • Always-on Surge power strip
            • Phone chargers
            • Server rack USB hub
          • Toggle-off power strip
            • Sony 65" TV
            • Logitech 7.1 amplified speakers
            • KVM hub

HISTORY

  • Prev APS Back-UPS 750 ES UPS: melange, cast, Always-On-Ups strip (usb hub, server case fan, asus router, tplink switch)
  • Prev APS Back-UPS 750 ES Surge: Always-On-Surge strip
  • Prev APS 750 was plugged into APS 550 surge

Update:

  • x pull toggle-off power strip from wall, plug into APS550 Surge
  • x mount CyberPower and plug into wall
  • x update and shut down Bitpost, unplug, plug into CP-UPS, turn on, fix IP as needed, etc.
  • x check power consumption and adjust plan
  • x update and shut down melange, unplug, plug into CP-UPS, turn on
  • x check power consumption and adjust plan - seems to me putting cast on CP-UPS would push us over the limit far too often
  • x update and shut down cast, unplug
  • x pull APS550 from wall, plug into CP Surge
  • plug cast into APS550, turn on
  • fix IP as needed etc
  • pull always-on-ups strip from APS 750W, plug into APS550 UPS
  • pull APS750 from APS550, harvest battery, mark battery, SMASH APS750