Hive
Overview
FreeNAS provides storage via Pools. A pool is a bunch of raw drives gathered and managed as a set. My pools are one of these:
- single drive: no FreeNAS advantage other than health checks
- raid1 pair: mirrored drives give normal write speeds, fast reads, single-fail redundancy, costs half of storage potential
- raid0 pair: fast writes, normal reads, no redundancy, no storage cost
- raid of multiple drives: FreeNAS optimization of read/write speed, redundancy, storage potential
Hardware
LSI 8-drive SAS board passed through proxmox to hive as "PCI Device":
Drives:
| Pool | Type | Drives |
|---|---|---|
| sassy | single | 250GB ssd |
sassy (250GB ssd) splat (1.82tb hdd x2) mack (1tb ssd) reservoir (3tb hd) sans (1.5tb hd) grim (3.64tb ssd x2)
- Need to remove SN S1DBNSAF215837R
Original drives, it's one of the 250GB...
/dev/sdh1: LABEL="hare-s3-4t" UUID="b1859924-f309-4940-bced-06274567c0cf" /dev/sda1: LABEL="macatak-1tb-ssd" UUID="08c0ca8c-4325-47ac-8173-1e0f78377e66" /dev/sdc1: LABEL="bold-250gb-ssd" UUID="39c4f3ef-6df8-4a9f-967b-8fff7f6b09af" /dev/sde1: LABEL="mello-250gb-ssd" UUID="323c424b-0741-4479-a863-9994a092f04a" /dev/sdb1: LABEL="rosewill-2tb-hd" UUID="a7fa0b5a-6fdc-4459-be54-c5f5b43a4758" /dev/sdf1: LABEL="blah-2tb-hd" UUID="d83fad9e-9bac-4186-bf13-8eae64266be9" /dev/sdd1: LABEL="reservoir-3tb-hd" UUID="9c1573d4-398a-4edc-a52f-05076124c3b6" /dev/sdg1: LABEL="sans-1.5tb-hd" UUID="459ee65f-ec5a-4c0c-80bf-f024a69ee9b7"