Maintenance reference: Difference between revisions
No edit summary |
No edit summary |
||
| Line 34: | Line 34: | ||
! Adding a new drive | ! Adding a new drive | ||
|- | |- | ||
To add a new drive: | | To add a new drive: | ||
# ls /dev/sd* # and make note of what you have | # ls /dev/sd* # and make note of what you have | ||
# stuff the new drive in the SATA tower or plug it into a SATA socket | # stuff the new drive in the SATA tower or plug it into a SATA socket | ||
Revision as of 22:15, 23 June 2013
Reference
| LAN IP addresses |
|---|
| We want all IP address management to happen on the Buffalo DD-WRT router, as much as possible.
Ideally, static IPs will be served up to every known box based on MAC address. Then no matter what OS is booted, the machine will have the same name and IP address. The router is slick, it can do it, but be careful to Save AND Apply changes there. airstation 192.168.21.200 dune 192.168.21.179 dhcp range for unknown devices: 2-99 (still more to do to make this consistent, keep at it) |
| Media Center drives |
|---|
8 bay SATA tower houses these drives:
|
There are also these drive partitions:
|
| Adding a new drive |
|---|
To add a new drive:
|
| Adding a user to the server |
|---|
su - # only needed if you want them to have their own group (otherwise use "users" group) groupadd #newuser# # the additional groups here are optional useradd #newuser# -m -g #newuser# -G users,wheel,audio,video,games,dvd,usb -s /bin/bash passwd #newuser# mkdir /home/#newuser# chown #newuser#:users /home/#newuser# # grant ssh access by adding to "AllowUsers" em /etc/ssh/sshd_config /etc/init.d/sshd restart # grant samba access to home folder # it's already set up in /etc/samba/smb.conf # but the user must be manually added to samba # use same pwd as before to sync them smbpasswd -a #newuser# /etc/init.d/samba restart # YOU PROBABLY HAVE TO RESTART ANY STUPID WINDOWS BOX before it will see things correctly! crazy # you can try this in Windows but it didn't work for me: # net use # net session \\samba.server.ip.address /delete |
| Updating mediawiki installation |
|---|
cd /var/www/localhost/htdocs/mediawiki emacs LocalSettings_redirector.php (to hardcode each site) php maintenance/update.php (repeat for each site) emacs LocalSettings_redirector.php (to reset dynamic behavior) |
| Creating a new ssh key pair for no-password access to a remote system |
|---|
wow I just had serious issues with basic ssh usage, so i'll put a summary on the wiki
basically most misunderstandings stem from describing these two:
client: machine that is trying to ssh into the server
server: machine that the client user wants to get to
most poor sots are just sitting on the client
and they create a pair and push their public key to the server
but in my case, more often, i want to create a pair on the server
and push the private key to the multiple places i need to connect FROM
when doing that, you have to push the public key into the server's authorized_keys
and configure the client to juggle multiple private keys
create a key pair:
ssh suser@server
ssh-keygen
use defaults
will create:
.ssh/id_rsa (private key)
.ssh/id_rsa.pub (public key)
put the public key in place:
cd .ssh
cat id_rsa.pub >>authorized_keys
put the private key on the client and configure:
scp id_rsa cuser@client:.ssh/id_rsa_server
ssh cuser@client
em .ssh/config
Host tdm thedigitalmachine.com
Hostname thedigitalmachine.com
IdentityFile ~/.ssh/id_rsa
User m
Host server
Hostname server.com
IdentityFile ~/.ssh/id_rsa_server
User suser
all is full of light
|
| Back up a linux system to a second bootable drive |
|---|
Steps:
These are the steps for backup of the dune box to the /spiceflow/2.0tb-newmovies/ drive. When we're done, we'll boot from that drive to prove we have a working standby system. rsync does an excellent job of copying just what we need. Test it with this: # a (archive mode -rlptgoD) v (verbose) x (don't cross filesystems) h (human-readable) n (dry run) rsync -avxhn --progress / /spiceflow/2.0tb-newmovies/ Do the job with this: rsync -avxh / /spiceflow/2.0tb-newmovies/ sent 28.10G bytes received 8.64M bytes 15.63M bytes/sec total size is 39.57G speedup is 1.41 There was def some old stuff in there worth cleaning up: /home/m/development/svn/mythtv... /var/tmp xbmc log files etc Next we fix /etc/fstab on the new drive to use the drive as root. Original config: /dev/disk/by-label/d-g2-root / ext3 noatime 0 1 /dev/disk/by-label/d-sp-20newmovies /spiceflow/2.0tb-newmovies ext4 noatime 0 2 New config (remember tho, we lose the 2gb drive): /dev/disk/by-label/d-g2-root /root-hot-drive ext3 noatime 0 1 /dev/disk/by-label/d-sp-20newmovies / ext4 noatime 0 2 Note: this never worked out for me due to my system's mix of ext3 and ext4. I'll retry once I migrate everything to ext4. Next, grub: mount /boot em /boot/grub/menu.lst Orig entry: title ----- linux-2.6.34-gentoo-r11_withext4 root (hd0,0) kernel /boot/linux-2.6.34-gentoo-r11_withext4 root=/dev/sda4 Add a new "standby" entry under it - do a "df" to find the root: title ----- ==STANDBY== linux-2.6.34-gentoo-r11_withext4 root (hd0,0) kernel /boot/linux-2.6.34-gentoo-r11_withext4 root=/dev/hda1 Then reboot to standby and see what we have... (no "latest" video library etc., but otherwise the same?) |
Maintenance of my Gentoo boxes
Maintenance of my music collection
udev: Assign unique names to your devices
Automatically mount and unmount your devices