Git: Difference between revisions

Latest revision as of 20:14, 23 November 2024

TASKS

New shared central bare repo

On central server (aka morosoph):

cd development(...)
git init --bare --shared mynewthang.git

On development box

cd development(...)
git clone morosoph:development/mynewthang.git
# this will create a new empty repo with no branch yet
# TO CREATE MASTER BRANCH (this is the only way):
# create files, git add, git commit, git push

Back on bitpost

git clone mynewthang.git # to create a working copy on server, if desired

create shared central repo for existing code

Create a bare repo with .git suffix

git init --bare --shared mything.git

Go to existing code and clone the repo next to it, with a temp name. Move .git into the existing code. Add code, add a .gitignore as needed, and you're all set.

cd mything/..
git clone (bare-repo-host-and-path)mything.git mything-temp
mv mything-temp/.git mything/
rm -rf mything-temp
cd mything
code .gitignore # as needed
git add (whatever you want to track)
git commit -a -m "init repo" && git push

Fetch a branch from remote without checking it out
Good for when you are rebasing a feature branch. git fetch origin develop:develop You would think `git fetch --all` would do it but does not (it fetches the active branch from all origins - seriously wtf, who ever wants THAT??).

Completely reset an out-of-sync branch to 100% match the remote
Sometimes some other idiot rebased the remote branch on you. Make sure you are on the right branch, locally. Then to completely force-reset it: git reset --hard origin/thebranchname

Set default branch of a bare repo
If you want the default branch of a bare repo to be something other than master: git branch * master moodboom-quick-http git symbolic-ref HEAD refs/heads/moodboom-quick-http git branch master * moodboom-quick-http

Find a file across branches

It's clunky, two steps, and you have to glob out the whole fucking name:

# get the commits that involved the filename
git log --all -- '**/*namebits*'
# even better, get the filenames too, and see if it was added or removed:
git log --all --stat -- '**/*namebits*'
# now find the branch with one of those commits:
git branch -a --contains #commithash#

gitflow
Gitflow is awesome, using it myself and everywhere I work these days (2020). Devs work out of develop branch Devs create feature branches off develop for any decent-sized work Once develop is stable and you are ready for a release: git tag -a -m "#MAJOR#.#MINOR#".0 #MAJOR#.#MINOR#.0 git checkout -b release/release_#MAJOR#.#MINOR# git push --set-upstream origin release_#MAJOR#.#MINOR# git checkout master && git merge release/release_#MAJOR#.#MINOR# && git push git checkout develop # and get back to it! Do hotfixes as needed in release branch, tagged #MAJOR#.#MINOR#.++, merged back into master and develop

Interactive rebase with squash
Excellent to do when on your own feature branch. Illegal to do if branch is shared AT ALL! git rebase -i myparentbranch # work through squash and merge - gitlens may help with squash if you use vscode for EDITOR git push -f

Push any branch from bare to origin
Good for when you are force-pushing a branch rebase. git push [-f] origin mybranch:mybranch

Fetch from one origin (eg gitlab) and push to another
My GitLab is usually a mirror, and therefore a push target. But if you edit a file in GitLab, you may need to pull it from remote "gitlab" and push it to remote "sc", like this: git fetch gitlab develop:develop git push sc This assumes you have something like the following in your config: [remote "sc"] url = git@shitcutter.com:the-digital-age/rad-scripts.git fetch = +refs/heads/:refs/remotes/origin/ [remote "github.com"] url = git@github.com:moodboom/rad-scripts.git fetch = +refs/heads/:refs/remotes/origin/ [remote "gitlab.com"] url = git@gitlab.com:moodboom/rad-scripts.git fetch = +refs/heads/:refs/remotes/origin/

Merging conflicts after diverging
Revert local changes in a file to HEAD git checkout -- path/to/file.txt Discard ALL LOCAL COMMITS and get the (possibly diverged) remote instead git reset --hard origin/master

Create and push a feature branch
This will move recent commits AND uncommitted changes into a new branch (but you probably want to finish by cleaning out commits from starting branch, and repulling after you merge the feature). git checkout -b feature/whiz-bang # Do this ONCE: git config --global push.default current # From then on: git push -u # OR, if you don't want the config, you have to be more specific: # git push -u origin feature/whiz-bang

getting upstream commits into your GitLab GITFLOW fork
NOTE: This doesn't work from a bitpost bare repo, so you need to make a new direct clone of your GitLab fork, first, if you don't have one yet. This is very easy if you have left the master branch alone for the parent's commits, and keep your add-on commits in a release-x.x branch, as we have for SWS and SWSS. cdl # Clone local repo directly from GitLab (already done on cobra) git clone git@gitlab.com:moodboom/Simple-Web-Server.git SWS-gitlab-moodboom cd SWS-gitlab-moodboom # make sure master is checked out git branch # add parent as remote git remote add ole-upstream git@gitlab.com:eidheim/Simple-Web-Server.git git fetch ole-upstream git rebase ole-upstream/master git push -f origin master You can now delete the fresh clone, it has done its job. Or leave it for ease-of-use for next rebase. Now update your bare repo on bitpost, to keep things in sync. git fetch origin master:master -f Next, go to dev repo, pull master. Check out release, create a new release from that, and rebase master. (or just create a new release branch off master if that's what you want) It is the gitflow way! Push your new branch to bare, then push bare to GitLab via something like: git push --set-upstream origin release/abt-0.0.3 To complete SW(S)S rebase, update mh-install-sws to use the new branch. Then run it on all your dev boxes, whoop. (Then, code up any fixes, sigh... and push em.. .sigh... and get on with it!)

getting upstream commits into your GitLab fork
NOTE: This doesn't work from a bitpost bare repo, so you need to make a new direct clone of your GitLab fork, first, if you don't have one yet. Add the remote, call it something specific: git remote add someauthor-upstream https://gitlab.com/someauthor/theprojectiforked Fetch all the branches of that remote into remote-tracking branches, such as upstream/master: git fetch someauthor-upstream Get on the branch where you are tracking the rebase. Typically your master branch but can be whatever: git checkout tlsv12 # or master or next or... Rewrite your branch so that any commits of yours that aren't already in upstream are replayed on top of that other branch (if you do a straight merge instead of rebase you'll screw up the upstream!): git rebase someauthor-upstream/master If you haven't done so, in GitLab, go to the "Protected Branch" settings and remove protection from master - it's just a fact that you're going to need to force-push to master. IF the branch that was the target of the rebase existed, force the push in order to push it to your own forked repository on GitLab. You only need to use the -f the first time after you've rebased: git push -f origin master ELSE if the branch you merged into is a new creation, set its upstream when you push: git push --set-upstream origin tlsv12 You will want to force-fetch to update the bare repo you may have on bitpost, DO THIS NOW or you will screw things up badly later: [Simple-WebSocket-Server.git] git fetch origin master:master -f You should also force-update ALL your dev repos, NOW, for the same reason: git reset --hard HEAD^^^^^^ && git pull NOTE that you may need to remove a remote-tracking branch if you don't need it any more. It's stupidly painful to get right, eg: [Simple-WebSocket-Server.git] git branch -rd eidheim/Simple-WebSocket-Server/master

getting upstream commits into your GitHub fork
From so... Add the remote, call it something specific: git remote add someauthor-upstream https://github.com/someauthor/theprojectiforked.git Fetch all the branches of that remote into remote-tracking branches, such as upstream/master: git fetch someauthor-upstream Get on the branch where you are tracking the rebase. Typically your master branch but can be whatever: git checkout tlsv12 # or master or next or... Rewrite your branch so that any commits of yours that aren't already in upstream are replayed on top of that other branch (if you do a straight merge instead of rebase you'll screw up the upstream!): git rebase someauthor-upstream/master IF the branch that was the target of the rebase existed, force the push in order to push it to your own forked repository on GitHub. You only need to use the -f the first time after you've rebased: git push -f origin master ELSE if the branch you merged into is a new creation, set its upstream when you push: git push --set-upstream origin tlsv12 Now master has the latest commits from the fork origin. You can rebase onto it, if you've been working in a branch (good): git checkout mybranch git rebase master

Clone a bare repo (eg github, gitlab, bb) into a bare repo
Say you want a bare repo to be shared by all your dev environments, but you need to push/pull THAT from a central bare repo, too. git clone --bare --shared git@bitbucket.org:equityshift/es-demo.git cd es-demo.git git config remote.origin.fetch "+:" git fetch --all I was surprised that this was difficult at all, and may still have some lessons to learn...

Create new branch on server, pull to client

# ON CENTRAL SERVER
git checkout master # as needed; we are assuming that master is clean enough as a starting point
git checkout -b mynewbranchy

# HOWEVER, use this instead if you need a new "clean" repo and even master is dirty...
# You need the rm because git "leaves your working folder intact".
git checkout --orphan mynewbranchy
git rm -rf .

# ON CLIENT
git pull
git checkout -b mynewbranchy origin/mynewbranchy
# if files are in the way from the previously checked-out branch, you can force it...
git checkout -f -b mynewbranchy origin/mynewbranchy

Merge changes in a single file
Explanation is here. git checkout mybranch git checkout --patch develop my/single/file.cpp

Remove old branches
Explanation is here. Remote: git push origin --delete <branch> Local: git branch -d <branch> git fetch <remote> --prune # Delete multiple obsolete tracking branches

Work with two local repos

Set up a remote, then fetch it as master.

cd repoToChange
git remote add otherplace ../../wherever/../gitrepo
git ls-remote otherplace # verify it looks ok, figure out which branch you like (if not master)
git fetch otherplace # gets it all
git checkout --track otherplace/master # or other branch as needed; this creates the branch and sets remote in one step, cool

Set up a remote, then fetch it into a non-master branch, and push it to the active origin.

cd repoToChange
git remote add otherplace ../../wherever/../gitrepo
git ls-remote otherplace # verify it looks ok, figure out which branch you like (if not master)
git fetch otherplace # gets it all
git checkout otherplace/master # creates it detached, good because we need to name the new branch something other than master
git checkout -b new_otherplace_branchname # creates new local branch with a good name
git push --set-upstream origin new_otherplace_branchname # takes the branch from the OLD origin and pushes it to the ACTIVE origin, cool!

Pull when untracked files are in the way
This will pull, forcing untracked files to be overwritten by newly tracked ones in the repo: git fetch --all git reset --hard origin/mymatchingbranch

Create new branch when untracked files are in the way

  git checkout -b bj143 origin/bj143
     git : error: The following untracked working tree files would be overwritten by checkout:
     (etc)
  
  TOTAL PURGE FIX (too much):
     git clean  -d  -fn ""
        -d dirs too
        -f force, required
        -x include ignored files (don't use this)
        -n dry run
  
  BEST FIX (just overwrite what is in the way):
     git checkout -f -b bj143 origin/bj143

Recreate repo

git clone ssh://m@thedigitalmachine.com/home/m/development/thedigitalage/ampache-with-hangthedj-module
cd ampache-with-hangthedj-module
git checkout -b daily_grind origin/daily_grind

If you already have the daily_grind branches and just need to connect them:

git branch -u origin/daily_grind daily_grind

Connect to origin after the fact

git remote add origin ssh:// m@bitpost.com/home/m/development/logs
git fetch
    From ssh:// bitpost/home/m/development/logs
     * [new branch]      daily_grind -> origin/daily_grind
     * [new branch]      master     -> origin/master
git branch -u origin/daily_grind daily_grind
git checkout master
git branch -u origin/master master

Ignore local and remote changes to a file

This is helpful for conf files that need local-specific modifications that shouldn't be pushed. You have to toggle it on/off as needed to get updates! See my SO answer.

       PREVENT COMMIT OF CHANGES TO A LOCAL FILE
       -----------------------------------------
       git update-index --skip-worktree apps/views/_partials/jsIncludes.scala.html

       RESET TO GET CHANGES AGAIN
       --------------------------
       git update-index --no-skip-worktree apps/views/_partials/jsIncludes.scala.html

       LIST SKIPPED FILES
       ------------------
       git ls-files -v . | grep ^S
       S app/views/_partials/jsIncludes.scala.html
       -----------------------------------------

Replace name and email of last commit
Reset the name and email of the last commit, when you realize you forgot to set them first: git commit --amend --author="First Last <email>" --no-edit

Simple tagging (when not using git-sync)

To add and push a tag to HEAD:

git tag -a 1.2.0 -m "1.2.0"
git push origin 1.2.0

To add and push a tag attached to a commit with current time as timestamp:

git tag -a 1.2.0 1bc92e2f -m "1.2.0"
git push origin 1.2.0

To tag a commit while ensuring the timestamp matches is slightly more complicated (but not bad). More details here:

# Set the HEAD to the old commit that we want to tag
git checkout 9fceb02

# temporarily set the date to the date of the HEAD commit, and add the tag
GIT_COMMITTER_DATE="$(git show --format=%aD | head -1)" \
git tag -a v1.2 -m"v1.2"

# push to origin
git push origin --tags

# set HEAD back to whatever you want it to be
git checkout master

Changing branches in a project with submodules
# always reset the @*$ submodules to proper commits git checkout develop && git submodule update

Hard-reset a misbehaving submodule to parent commit version
git submodule deinit -f . git submodule update --init

CONFIGURATION

Set name and email
Globally on one machine (note the machine name at end of user name): git config --global user.email m@thedigitalmachine.com; git config user.name "Michael Behrns-Miller [cast]" Override for a repository: git config user.email mbm@equityshift.io; git config user.name "MBM [cast]"

Set default root to main not master
I love the idea of a kinder root name, suck it up alt-right down-punchers, lol. Configure it to always happen: git config --global init.defaultBranch main Fix it for a newly initialized repository: git branch -m main

Visual difftool and mergetool setup

Meld is purdy, let's kick its tires. Hope it actually works...

git config --global diff.tool meld
git config --global merge.tool meld
git config --global --add difftool.prompt false

I used to set up kdiff3 manually, like this... (gross)

LINUX - put this in ~/.gitconfig

[diff]
    tool = kdiff3

[merge]
    tool = kdiff3

WINDOZE

[difftool "kdiff3"]
    path = C:/Progra~1/KDiff3/kdiff3.exe
    trustExitCode = false
[difftool]
    prompt = false
[diff]
    tool = kdiff3
[mergetool "kdiff3"]
    path = C:/Progra~1/KDiff3/kdiff3.exe
    trustExitCode = false
[mergetool]
    keepBackup = false
[merge]
    tool = kdiff3

LINUX Before - What a ridiculous pita... copy this into .git/config...

[difftool "kdiff3"]
    path = /usr/bin/kdiff3
    trustExitCode = false
[difftool]
    prompt = false
[diff]
    tool = kdiff3
[mergetool "kdiff3"]
    path = /usr/bin/kdiff3
    trustExitCode = false
[mergetool]
    keepBackup = false
[merge]
    tool = kdiff3

Convert to a bare repo
Start with a normal git repo via [git init]; add your files, get it all set up. Then do this: cd repo Now you can copy-paste this... mv .git .. && rm -fr * mv ../.git . mv .git/* . rmdir .git git config --bool core.bare true cd .. Don't copy/paste these, you need to change repo name... mv repo repo.git # rename it for clarity git clone repo.git # (optional, if you want a live repo on the server where you have the bare repo) Then you can clean up old branches like daily and daily_grind, as needed.

Convert bare to a mirror of remote (github, facebook, etc)
You need a bare mirror repo if you want to take someone else's repo and create your own bare to work from. If you did NOT specify --mirror when you first created the bare repo, you can convert to a mirror by adding these last two lines to config, underneath url: [remote "origin"] url = git@github.com:facebook/proxygen.git fetch = +refs/:refs/ mirror = true Now you can fetch from the bare repo: git fetch

Create merge-to command
Add this handy alias command to all git repos' .config file... [alias] merge-to = "!gitmergeto() { export tmp_branch=`git branch \| grep '* ' \| tr -d '* '` && git checkout $1 && git merge $tmp_branch && git checkout $tmp_branch; unset tmp_branch; }; gitmergeto"

Fix github diverge from local bare repo following README.md edit
Yes editing the README.md file on github will FUCK UP your downstream bare repo if you meanwhile push to it before pulling. Fixing it is a PAIN in the ASS, you have to create a new local repo and pull github into that, pull in from your other local repo, push to github, pull to your bare... git clone git@github.com:moodboom/quick-http.git quick-http-with-readme-conflict git remote add local ../quick-http git fetch local git merge local/master # merge in changes, likely trivial git push # pushes back to github cd .. mv quick-http.git quick-http.git__gone-out-of-sync-fu-github-readme-editor git clone git@github.com:moodboom/quick-http.git --bare cp quick-http.git__gone-out-of-sync-fu-github-readme-editor/config quick-http.git/ And that MIGHT get you on your way... but I would no longer trust ANY of your local repos... This is a serious pita.

Windows configure notepad++ editor
git config --global core.editor "'C:/Program Files (x86)/Notepad++/notepad++.exe' -multiInst -notabbar -nosession -noPlugin"

Fix push behavior - ONLY PUSH CURRENT doh
git config --global push.default current

Multiple upstreams
Use this to cause AUTOMATIC push/pull to a second origin: git remote set-url origin --push --add user1@repo1 git remote set-url origin --push --add user2@repo2 git remote -v show Leave out --push if you want to pull as well... but I'd be careful, it's better if code is changed in one client with this config, and then pushed to the multiple origins from there. Otherwise, things are GOING TO GET SYNCY-STINKY.

Git branching strategies

Simplified Gitflow

This is awesome, tight, and well-capable of handling any app with a single primary release (like a website).

                        RELEASE TAG
o----------------------------o-----------------o------------o------> MASTER
 \                          /  \                \----------/ HOTFIX
  \                        /    \                          \
   \----------------------/      \--------------------o-----o------> DEVELOP
                                  \                  /
                                   \----------------/ FEATURE

Gitflow

I was a die-hard believer in gitflow for a while. It's very capable. Too capable. You MIGHT need it if you are supporting multiple versions in production... but in all my cases, it is overkill, compared to Simplified Gitflow. The classic diagram, originally from here...

LFS

Just don't use it. It's shite. If you get stuck working with a repo that requires it, and you are using ssh on linux which just won't work with LFS... you will probably end up with a damaged repo. Fix it with this:

git read-tree HEAD && GIT_LFS_SKIP_SMUDGE=1 git checkout -f HEAD

After that, use GIT_LFS_SKIP_SMUDGE=1 during any git command:

GIT_LFS_SKIP_SMUDGE=1 git pull # etc.

My git pages (older)

Track your changes to an open-source project with git

Using git on Windows

Portable git