Hive: Difference between revisions

Latest revision as of 16:31, 8 October 2023

TODO

run mh-setup-samba everywhere
- x cast
- x bandit
- glam
update kodi shares to remove old, add mine
- x cast
- case (needs kodi update)
update windoze mapped drive to point to mine/mack (get it to persist, ffs)
move tv-mind, film to mine, pull them out of bitpost, harvest (they are 4 and 6TB!!)
SHIT i should have burn-tested the drives!!! I AM SEEING ERRORS!! And I won't be able to fix once i have them loaded up... rrr... the true burn tests are destructive... since i'm an impatient moron, i will just have to do SMART tests from TrueNAS UI...

da10  SHORT: SUCCESS
da13  SHORT: SUCCESS
(keep going)

Pools

Pool	Capacity	Type	Drives
grim	7.2 TB	raid0	3.64 TB ssd x2
mine	43 TB	raidz	8TB ssd x7
safe	5.2 TB	raidz	1 TB ssd x7

NOTE that there is an eighth 8TB drive matching the mine array in Bluto. Harvest it from there if one of the 7 dies.

Hardware

LSI 8-drive SAS board passed through proxmox to hive as "PCI Device":

7 1 TB Crucial SSDs

Plugged in to SATA 1, 2, 3 and U.2 1, 2, 3, 4. NOTE: to get U.2 drives to be recognized by Melange ASUS mobo required a BIOS change:

Bios > advanced > onboard devices config > U.2 mode (bottom) > SATA (NOT PCI-E)

Hive history

@@ Line 1: / Line 1: @@
-== Overview ==
+== TODO ==
-FreeNAS provides storage via Pools.  A pool is a bunch of raw drives gathered and managed as a set.  My pools are one of these:
+* run mh-setup-samba everywhere
-* single drive: no FreeNAS advantage other than health checks
+** x cast
-* raid1 pair: mirrored drives give normal write speeds, fast reads, single-fail redundancy, costs half of storage potential
+** x bandit
-* raid0 pair: fast writes, normal reads, no redundancy, no storage cost
+** glam
-* raid of multiple drives: FreeNAS optimization of read/write speed, redundancy, storage potential
+* update kodi shares to remove old, add mine
+** x cast
+** case (needs kodi update)
+* update windoze mapped drive to point to mine/mack (get it to persist, ffs)
+* move tv-mind, film to mine, pull them out of bitpost, harvest (they are 4 and 6TB!!)
+* SHIT i should have burn-tested the drives!!!  I AM SEEING ERRORS!!  And I won't be able to fix once i have them loaded up... rrr... the true burn tests are destructive... since i'm an impatient moron, i will just have to do SMART tests from TrueNAS UI...
+ da10  SHORT: SUCCESS
+ da13  SHORT: SUCCESS
+ (keep going)
-== Hardware ==
+== Pools ==
-LSI 8-drive SAS board passed through proxmox to hive as "PCI Device":
-[[File:Melange-LSI-board.png]]
-Drives:
 {| class="wikitable"
-|+ style="caption-side:bottom; color:#e76700;"|''footer''
+! Pool
+! Capacity
+! Type
+! Drives
 |-
-! style="color:green" | Pool
+|grim
-! style="color:green" | Type
+|7.2 TB
-! style="color:red" | Drives
+| style="color:red" |raid0
+|3.64 TB ssd x2
 |-
-|sassy
+|mine
-! style="color:red" |single
+|43 TB
-|250GB ssd
+| style="color:green" |raidz
+|8TB ssd x7
+|-
+|safe
+|5.2 TB
+| style="color:green" |raidz
+|1 TB ssd x7
 |}
-  sassy (250GB ssd)
+NOTE that there is an eighth 8TB drive matching the mine array in [[Bluto]].  Harvest it from there if one of the 7 dies.
- splat (1.82tb hdd x2)
- mack (1tb ssd)
+== Hardware ==
- reservoir (3tb hd)
- sans (1.5tb hd)
+* LSI 8-drive SAS board passed through proxmox to hive as "PCI Device":
- grim (3.64tb ssd x2)
+[[File:Melange-LSI-board.png]]
-* Need to remove SN S1DBNSAF215837R
+* 7 1 TB Crucial SSDs
+Plugged in to SATA 1, 2, 3 and U.2 1, 2, 3, 4.
+NOTE: to get U.2 drives to be recognized by Melange ASUS mobo required a BIOS change:
+ Bios > advanced > onboard devices config > U.2 mode (bottom) > SATA (NOT PCI-E)
-Original drives, it's one of the 250GB...
+[[Hive history]]
- /dev/sdh1: LABEL="hare-s3-4t" UUID="b1859924-f309-4940-bced-06274567c0cf"
- /dev/sda1: LABEL="macatak-1tb-ssd" UUID="08c0ca8c-4325-47ac-8173-1e0f78377e66"
- /dev/sdc1: LABEL="bold-250gb-ssd" UUID="39c4f3ef-6df8-4a9f-967b-8fff7f6b09af"
- /dev/sde1: LABEL="mello-250gb-ssd" UUID="323c424b-0741-4479-a863-9994a092f04a"
- /dev/sdb1: LABEL="rosewill-2tb-hd" UUID="a7fa0b5a-6fdc-4459-be54-c5f5b43a4758"
- /dev/sdf1: LABEL="blah-2tb-hd" UUID="d83fad9e-9bac-4186-bf13-8eae64266be9"
- /dev/sdd1: LABEL="reservoir-3tb-hd" UUID="9c1573d4-398a-4edc-a52f-05076124c3b6"
- /dev/sdg1: LABEL="sans-1.5tb-hd" UUID="459ee65f-ec5a-4c0c-80bf-f024a69ee9b7"