Hive: Difference between revisions

Revision as of 14:10, 2 April 2022

DONE: copy bitpost/softraid/* to safe/ > ALWAYS USE safe/projects ETC NOW

set up cron to pull all repos to safe/ every night
mack: move mack data to safe, remove torrent symlinks, update windoze mapped drive and kodi
reservoir: move reservoir data to safe, fix torrent symlinks, update kodi
sassy: stop rtorrent, move sassy to safe, update edit_torrent_shows links, update torrent symlinks, update all SharedDownload folders (via mh-setup-samba!)
splat has tons of tv on it, won't fit on safe - move to grim? YES, update edit_torrent_shows links, update torrent symlinks

safe should now be pretty full...

update all my code on softraid; remove both the old softraid drives and give dan for offsite backup
move tv-mind, film to safe and grim, remove drives

Pool	Capacity	Type	Drives
sassy	0.2 TB	single	250GB ssd
splat	3.6 TB	raid0	1.82 TB hdd x2
mack	0.9 TB	single	1 TB ssd
reservoir	2.7 TB	single	2.73 TB hdd
grim	7.2 TB	raid0	3.64 TB ssd x2
safe	6 TB	raidz	1 TB ssd x7

Every pool should have one dataset. This is where we set the permissions, important for SAMBA access.

Dataset settings:

name #pool#-ds
share type SMB
user m
group m
ACL
 who everyone@
 type Allow
 Perm type Basic
 Perm Full control
 Flags type Basic
 Flags Inherit

Share each dataset as a Samba share under:

Sharing > Windows Shares (SMB)

Use the pool name for the share name.

Use the same ACL as for the dataset.

Plugged in to SATA 1, 2, 3 and U.2 1, 2, 3, 4. NOTE: to get U.2 drives to be recognized by Melange ASUS mobo required a BIOS change:

Bios > advanced > onboard devices config > U.2 mode (bottom) > SATA (NOT PCI-E)

@@ Line 18: / Line 18: @@
 * update all my code on softraid; remove both the old softraid drives and give dan for offsite backup
 * move tv-mind, film to safe and grim, remove drives
-== Overview ==
-FreeNAS provides storage via Pools.  A pool is a bunch of raw drives gathered and managed as a set.  My pools are one of these:
-* single drive: no FreeNAS advantage other than health checks
-* raid1 pair: mirrored drives give normal write speeds, fast reads, single-fail redundancy, costs half of storage potential
-* raid0 pair: striped drives gives fast writes, normal reads, no redundancy, no storage cost
-* raid of multiple drives: FreeNAS optimization of read/write speed, redundancy, storage potential
-The three levels of raid are:
-* raidz: one drive is consumed just for parity (no data storage, ie you only get (n-1) storage total), and one drive can be lost without losing any data; fastest
-* raidz2: two drives for parity, two can be lost
-* raidz3: three drives for parity, three can be lost; slowest
 == Pools ==