Hive: Difference between revisions

Latest revision as of 16:31, 8 October 2023

TODO

run mh-setup-samba everywhere
- x cast
- x bandit
- glam
update kodi shares to remove old, add mine
- x cast
- case (needs kodi update)
update windoze mapped drive to point to mine/mack (get it to persist, ffs)
move tv-mind, film to mine, pull them out of bitpost, harvest (they are 4 and 6TB!!)
SHIT i should have burn-tested the drives!!! I AM SEEING ERRORS!! And I won't be able to fix once i have them loaded up... rrr... the true burn tests are destructive... since i'm an impatient moron, i will just have to do SMART tests from TrueNAS UI...

da10  SHORT: SUCCESS
da13  SHORT: SUCCESS
(keep going)

Pools

Pool	Capacity	Type	Drives
grim	7.2 TB	raid0	3.64 TB ssd x2
mine	43 TB	raidz	8TB ssd x7
safe	5.2 TB	raidz	1 TB ssd x7

NOTE that there is an eighth 8TB drive matching the mine array in Bluto. Harvest it from there if one of the 7 dies.

Hardware

LSI 8-drive SAS board passed through proxmox to hive as "PCI Device":

7 1 TB Crucial SSDs

Plugged in to SATA 1, 2, 3 and U.2 1, 2, 3, 4. NOTE: to get U.2 drives to be recognized by Melange ASUS mobo required a BIOS change:

Bios > advanced > onboard devices config > U.2 mode (bottom) > SATA (NOT PCI-E)

Hive history

@@ Line 1: / Line 1: @@
 == TODO ==
-* passthru 7 1TB drives to hive
+* run mh-setup-samba everywhere
-* move sassy and splat data to safe, remove them
+** x cast
-* continue migration until we have 7 slots free (16 - 7 safe - 2 grim)
+** x bandit
-* add 7 new BIG ssds in new raidz array
+** glam
-* rinse and repeat
+* update kodi shares to remove old, add mine
+** x cast
+** case (needs kodi update)
+* update windoze mapped drive to point to mine/mack (get it to persist, ffs)
+* move tv-mind, film to mine, pull them out of bitpost, harvest (they are 4 and 6TB!!)
+* SHIT i should have burn-tested the drives!!!  I AM SEEING ERRORS!!  And I won't be able to fix once i have them loaded up... rrr... the true burn tests are destructive... since i'm an impatient moron, i will just have to do SMART tests from TrueNAS UI...
+ da10  SHORT: SUCCESS
+ da13  SHORT: SUCCESS
+ (keep going)
-== Overview ==
+== Pools ==
-FreeNAS provides storage via Pools.  A pool is a bunch of raw drives gathered and managed as a set.  My pools are one of these:
-* single drive: no FreeNAS advantage other than health checks
-* raid1 pair: mirrored drives give normal write speeds, fast reads, single-fail redundancy, costs half of storage potential
-* raid0 pair: striped drives gives fast writes, normal reads, no redundancy, no storage cost
-* raid of multiple drives: FreeNAS optimization of read/write speed, redundancy, storage potential
-The three levels of raid are:
-* raidz: one drive is consumed just for parity (no data storage, ie you only get (n-1) storage total), and one drive can be lost without losing any data; fastest
-* raidz2: two drives for parity, two can be lost
-* raidz3: three drives for parity, three can be lost; slowest
-== Hardware ==
-* Drives
 {| class="wikitable"
 ! Pool
@@ Line 28: / Line 22: @@
 ! Type
 ! Drives
-|-
-|sassy
-|0.2 TB
-| style="color:red" |single
-|250GB ssd
-|-
-|splat
-|3.6 TB
-| style="color:red" |raid0
-|1.82 TB hdd x2
-|-
-|mack
-|0.9 TB
-| style="color:red" |single
-|1 TB ssd
-|-
-|reservoir
-|2.7 TB
-| style="color:red" |single
-|2.73 TB hdd
 |-
 |grim
@@ Line 53: / Line 27: @@
 | style="color:red" |raid0
 |3.64 TB ssd x2
+|-
+|mine
+|43 TB
+| style="color:green" |raidz
+|8TB ssd x7
 |-
 |safe
-|6 TB
+|5.2 TB
 | style="color:green" |raidz
 |1 TB ssd x7
 |}
+NOTE that there is an eighth 8TB drive matching the mine array in [[Bluto]].  Harvest it from there if one of the 7 dies.
+== Hardware ==
 * LSI 8-drive SAS board passed through proxmox to hive as "PCI Device":